Abrasive Waterjet
Garnet abrasive at 4,000 bar pressure cuts metals, stone, glass, and composites up to 200 mm thick.
Waterjet Cutting
Abrasive waterjet cutting for virtually any material — no heat-affected zone, no distortion. Steel, titanium, glass, ceramic, composites, and stone.
Get Instant Quote →Waterjet Capabilities
Pure Waterjet
No abrasive for soft materials — foam, rubber, food, and thin plastics. Clean edges, no contamination.
No HAZ
Cold-cutting process — zero heat-affected zone. Ideal for hardened steels, titanium, and materials sensitive to thermal distortion.
5-Axis Waterjet
Bevel cuts, taper compensation, and angled features without secondary machining on complex profiles.
Materials & Thickness Range
FAQ
Waterjet handles much greater thicknesses (up to 150+ mm) with no HAZ. Laser is faster for thin sheet under 20 mm.
Yes — because it is a cold process, hardness has no effect on cutting ability. Hardened H13 and D2 cut as easily as mild steel.
Typically 0.8–1.2 mm depending on abrasive and speed. We compensate for this in the toolpath.
Cut anything. No heat. No stress.
Upload your DXF or STEP and get a waterjet quote online.
Start Your Quote →